Ravenol Pumpa sa drukalicom je univerzalna alatka za razne namjene i mogućnosti. Kapaciteta je jednog litra a izrađena je od specijalne plastike otporne na sve hemikalije i tečnosti koje se koriste u auto industriji. Preporučena recimo sredstvima za odmašćivanje, sredstvima za pranje itd. Na samom tijelu postoje oznake kako bi se različite tečnosti mogle razblaživati a dizna na vrhu je podešavajuća tako da se može dobiti mlaz ili lepeza po želji.
Before use, check that none of the components are damaged and that they work properly. Unscrew the pump from the container and fill with liquid up to the "max" level marked on the bottle. Then, screw the pump head back on and securely tighten it so that it is airtight; otherwise pressure cannot be generated.
Pump air into the container using the plunger (approx. 20-30 pump actions). The sprayers are equipped with an automatic pressure release valve, meaning it is not possible to generate more pressure than is specified.
To begin spraying, push down the spray button, and regulate the spray from a jet to a mist by turning the nozzle.
Carefully unscrew the sprayer head so that the pressure can escape slowly.
Dispose of the contents in accordance with the manufacturer's instructions; do not simply pour it down the drain.
Then clean the pump using clean water or spray a suitable cleaning product through it.
Never allow the container to remain under pressure for an extended period of time and never expose it to direct sunlight. Do not fill the sprayer with liquids at a temperature of over 30°C and always follow the safety instructions provided by the manufacturer of the liquid (see the product information or the safety data sheet). Replace damaged components (e.g. seals). Do not direct the spray at people or animals!